FormFutura Premium PLA
It doesn't matter which desktop 3D printer you have, as 3D Printing will always go smoothly with Formfutura filament. Our Premium 2.85mm PLA filament prints perfectly with all common desktop 3D printers. Amongst others:
- BCN3D Sigma
- Type A Machines
- Rapidbot, Orca, Mendel
- AND MANY MORE....!
Product detailsOur Premium PLA 3D printer filament is wrapped on a reusable plastic spool which contains approximately 1Kg of filament. Our spool-wrapped Premium PLA filaments are packed in a silica sealed bag and come in a cardboard box. Please see below for more details with respect to the weight and packaging of our spool-wrapped Premium PLA 3D printer filaments:
|Filament Net Weight:||± 1 Kg|
|Spool Size (D x h):||195 mm x 85 mm|
|Spool Hub Diameter:||38 mm|
|Carton Box Size (L x W x H):||205 mm x 205 mm x 90 mm|
|Packaged weight||1.45 Kg|
For more technical specifications about our PLA 2.85mm Flaming Red™ 3D printer filament, please have a look a the 'SPECIFICATIONS' tab.
General Tips & Tricks for printing with PLA filaments
The printing temperature guideline for printing with our Premium PLA filament is approximately 180°C to 200°C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
PLA has much less tendency to warp compared to ABS. Therefore it can be printed both with and without a heated print bed. However, if your desktop 3D printer does have a heated print bed it is recommended to set your print bed temperature to approximately 40° to 50° C.
A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. There are several tricks to get the first layer of your PLA print to stick better to the print bed of your 3D printer.
- Blue Masking Tape. PLA prints usually stick really well to blue masking tape. When preparing the print bed it is better to have tiny gaps between your strokes of masking tape, rather than having overlaps. Overlaps of smaller pieces of tape may cause difficulties later on during the print process. We have tested a wide variety of masking tapes and found that the best results can be obtained with Eurocel Blue Masking Tape.
- Coat your print bed with hairspray. Like ABS, PLA has a tendency to stick really well to extra strong hairsprays.
Blue masking tape is unlikely to leave a residue on your print bed. A hairspray coating however will leave a residue on your print bed.