310 E Boalt Street, Suite F

Sandusky, Ohio 44870

Mon-Fri, 9am-5pm

PolyMaker PolyMax™ PLA
PolyMaker PolyMax™ PLA
PolyMaker PolyMax™ PLA
PolyMaker PolyMax™ PLA
PolyMaker PolyMax™ PLA
PolyMaker PolyMax™ PLA

PolyMaker PolyMax™ PLA

$ 49.99

Spool Specs

spool-size

Material Specs

Glass Transition Temp
~ 60 °C (140 °F)

Filament Melting Point
150 – 160 °C (302 – 320 °F)

Density
1.25 g/cm3

Diameters
1.75 mm or 3 mm

Tolerance
± 0.05 mm
50 Microns
(Typical~ 0.02 mm )

General Printing Settings

Temperature Range:
180 – 240 °C

Recommended 3D printing temperature:
185 – 200 °C (Diameter of 1.75mm and with Heated Bed)
200 – 230 °C (Diameter of 1.75mm and without Heated Bed)
200 – 230 °C (Diameter of 3mm)

Recommended 3D print speed:
40 – 120 mm/s

Build platform:
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak, a build plate surface designed specifically for desktop FDM/FFF printers. You can buy this material on the BuildTak website www.buildtak.com

Technical Data Sheets:
If your looking for more information on PolyMax™ PLA then you can download the material’s technical data sheet (TDA) here

PolyMax™ PLA is a 3D printing material with excellent mechanical properties and printing quality. PolyMax™ PLA has an impact resistance of up to nine times that of regular PLA, and better overall mechanical properties than ABS.

EXTREMELY TOUGH

Regular PLA is a very brittle material, which greatly limits its range of applications. PolyMax™ PLA was designed to change this. Featuring increased impact strength of up to 9 times that of regular PLA and 20% better than ABS, PolyMax™ PLA is a sure winner when it comes to toughness. So if you are looking for a material that can withstand your mechanically demanding tasks, PolyMax™ PLA is up to the challenge.

tough image_opt
quality image_opt

UNCOMPROMISED QUALITY

The good mechanical strength of PolyMax™ PLA is achieved with no compromise in printing quality. As PolyMax™ PLA is also produced with Jam-Free™ technology you can be certain you will get high quality prints with excellent strength while still enjoying the ease of printing PLA.

ABS ? NO MORE

Still printing ABS while trying to endure the odour and potential health risk? With PolyMax™ PLA you can get rid of that potentially hazardous ABS and still achieve the same structural strength with even more benefits such as better printer compatibility, easier printing, less warping, no harmful odour, and in many cases even better mechanical properties.

abs no more image_opt
PolyMaker PolyMax™ PLA
$ 49.99

Size
Color
PolyMaker PolyMax™ PLA

PolyMaker PolyMax™ PLA
Added to cart PolyMaker PolyMax™ PLA
View product details