Jam Free™ : Our patented Jam-Free™ technology dramatically improves the heat stability of our PLA filaments, by combining the latest development in biopolymer formulation and advanced polymer processing technologies. As a result, our PolyPlus™ PLA filament exhibits a high softening temperature of more than 140 °C, over 80 degrees higher than all other PLA filaments currently on the market. So while printing, the filament will never soften in the “cold end” and can melt rapidly once entering the heating zone. This leads to extremely smooth printing and no more nozzle-jams!
PolyMaker Poly Plus PLA
Colourful : Brighten up your models with a choice of seven vibrant colours or give them that crystal shine with our four translucent colours. With a selection of 11 different colours and transparencies you are bound to find the right choice for your 3D printing experience.
High Quality : PolyPlus™ PLA, like all our other products, is manufactured using state-of-the-art polymer processing technologies and equipment. It features the most rigorous specs among all the PLA filaments in the market. With our eight-step quality control process we are not only aiming to adhere to industrial standards but are surely becoming a market leader for quality in the 3D Printing industry. All to ensure that only products of the highest quality reach your doorstep.
Safe & Clean : PolyPlus™ PLA is produced exclusively using NatureWorks’ Ingeo™ PLA resin. Unlike some filaments on the market our PolyPlus™ PLA does not release hazardous odours ensuring a safe and clean printing experience. The PLA we use are not only certified for food contact but also completely biodegradable and has one of the most eco-responsible manufacturing processes in the industry, minimising the impact on our environment.
Glass Transition Temp
~ 60 °C (140 °F)
Filament Melting Point
150 – 160 °C (302 – 320 °F)
1.75 mm or 3 mm
± 0.05 mm
(Typical~ 0.02 mm )
General Printing Settings
180 – 240 °C
Recommended 3D printing temperature:
190 – 200 °C (Diameter of 1.75mm and with Heated Bed)
210 – 230 °C (Diameter of 1.75mm and without Heated Bed)
210 – 230 °C (Diameter of 3mm)
Recommended 3D print speed:
40 – 120 mm/s
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak, a build plate surface designed specifically for desktop FDM/FFF printers. You can buy this material on the BuildTak website www.buildtak.com.